|
Bonsai Doer
Join Date: Aug-2001
Location: Fresno, CA
Country: USA
Posts: 5,452
|
Make the first cut with the straight edge and then tamp the edge against the cut edge to realign it. use a scrap length of wood to clamp it to the work surface. Measure and make the second cut.
After making the cuts, cut it for length and affix the matt with glue rolled out on the bottom of the project. I did the same thing for the top valance and the face of the front of the bottom deck.
__________________
I been kidding the last seven years.
no.... really!
|