|
j à Рã
Join Date: May-2005
Location: Puyallup WA
Country: USA
Posts: 182
|
darrellw, I dipped the entire (bisqued) pot into a container of the oxide wash. I made the oxide wash "thin" enough so that it took 2 dips. A little "ball-clay" was added to help it adhere, and perhaps knock the shine off a little.
I tried brushing, but no matter what I did, I always had brush marks. The best way to apply a oxide wash is to spray it. But the oxide I used, is a very dangerous inhalation hazard, which would require an industrial mask.
|