|
Tips:5¢ Advice:Free
Join Date: Aug-2001
Location: Silicon Valley
Country: USA
Posts: 9,738
|
Assembly was really easy because John had made a few important preparations.
1) Marking the centerline on the tabletop
2) Drilling a small pilot hole through the center of the table,
3) Drilling the tabletop to provide a clearance hole for attaching the screws to the underside of the table. (More about that later.)
Here the turntable is being positioned on the round piece of plywood. You can get these plywood rounds precut at many hardware/lumber places, or you can cut your own with a jigsaw.
__________________
bonsaiTALK: Over 100,005.36 Megabytes Served this Month!
|